QUICK LINKS

• 
• Travertine Sealer Buffalo Creek
• Best Travertine Sealer Buffalo Creek
• Sealing Travertine Kitchens Buffalo Creek
• Sealing Travertine Bathrooms Buffalo Creek
• Sealing Travertine Pavers Buffalo Creek
• 
• Limestone Sealer Buffalo Creek
• Penetrating Limestone Sealer Buffalo Creek
• Outdoor Limestone Sealer Buffalo Creek
• Protect Limestone against Acid Attack
• Protect Limestone against Salt Attack
• 
• Marble Sealer Buffalo Creek
• Penetrating Marble Sealer Buffalo Creek
• Outdoor Marble Seale Buffalo Creek
• Protect Marble against Acid Attack
• Protect Marble against Salt Attack

1. Home >
2. Finishes Available for Slate >
3. Darwin >
4. Buffalo Creek

Finishes Available for Slate Buffalo Creek - Darwin

While marbles and granites are commonly ground and polished to achieve a high gloss, many types of slatestone in Buffalo Creek are too dense or textured for this treatment. In most cases, slatestone will be honed or finished to a flat or matte appearance. Honed slatestone typically exhibits a smooth, matte surface with minimal sheen.

However, there are several other finishes available for slatestone in Buffalo Creek. Various processes and finishing techniques can yield distinct looks and effects, offering versatility in design and aesthetics.

Characterized by a relatively rough surface, the natural slatestone is cut with saws without undergoing additional processes such as honing, tumbling, or flaming. The saw marks are likely to be visible on the surface.

Characterized by a smooth and reflective surface that enhances the full color and character of the slatestone. This finish is less slip-resistant and typically reserved for indoor areas in Buffalo Creek such as hotel receptions and tabletops. The polishing process involves using increasingly finer abrasives after the honing stage, followed by buffing the stone to achieve a high gloss.

Antiqued/Tumbled Finish:

Tumbling is a common technique used to distress the edges and surface of slatestone in Buffalo Creek by vibrating it in a bath of sand, grit, and sometimes acid. This process results in a finish that appears aged and worn.

Honing is a less aggressive method compared to grinding, involving the use of coarse grit abrasives to grind and sand the slatestone in Buffalo Creek, creating a smooth but satin, non-reflective surface.

Ground finishing is a highly aggressive approach to refinishing slatestone in Buffalo Creek, utilizing a heavy-weighted floor buffer with metal-bonded diamond grit to remove deep scratches and lippage. The aim is to flatten the surface and smooth out imperfections, often followed by honing and polishing.

Brushing with steel or hard nylon brushes, along with water, is used to wear out softer parts of the slatestone, creating a textured finish that imparts an antique appearance.

High-pressure sandblasting or shot-blasting creates a textured surface on slatestone in Buffalo Creek. This process can lighten the stone and mask its natural character by obscuring veins and fossils within the stone.

This technique involves using a bush hammer, either by machine or hand, to impact the surface of slatestone and create a highly anti-slip finish. The result is a textured surface with pitted indentations, providing enhanced traction.

Mechanical chiselling is employed to create lines or grooves in the slatestone, producing an anti-slip finish.

In most situations with normal wear on natural stone, a simple polish will restore the sheen.

In cases with heavy wear and etches, StoneMaster can resurface the area and remove all scratches and etches and then polish with a polishing compound to restore the original finish.