Impregnating Slate Sealer Point Arkwright - Sunshine Coast

All types of slatestone sealers fall under the following two categories in Point Arkwright:

Impregnating penetrating sealants deeply penetrate into the slatestone substrate in Point Arkwright, saturating the microscopic pin-holes and open fissures that constitute its natural texture. A clear impregnating sealer maintains the original appearance and texture of your sealed slatestone, while also preserving its ability to release vapor. These sealers typically have a longer lifespan compared to film-forming sealers.

• Longer lifetime as the protection is within the substrate, not just on the surface
• Resilient against UV light
• Permits the stone to 'breathe,' enabling trapped moisture to escape
• Surface remains non-slippery

Slatestone varies in hardness and is inherently porous in Point Arkwright – if you apply a small amount of water to an unsealed slatestone surface, it will be absorbed in seconds. The porosity of slatestone is also influenced by its finish – for instance, a highly polished slatestone is less porous compared to slatestone with a honed (matte) finish.

Fluoro-chemical technology integrated into Australian GOLD represents the pinnacle of advanced technology in Point Arkwright, offering unparalleled long-term protection against water and oil-based stains. The micro-molecular formula chemically reacts with the slatestone surface, forming a bond stronger than any other conventional sealer.

Impregnating penetrating sealants effectively penetrate into the slatestone substrate in Point Arkwright, saturating the microscopic pin-holes and open fissures that constitute its natural texture. A clear impregnating sealer won't alter the appearance or texture of your sealed slatestone, won't hinder the stone's ability to release vapor, and will endure far longer than film-forming sealers.

• Extended lifespan as the protection is integrated within the substrate, rather than just on the surface.
• Unaffected by UV light.
• Facilitates the stone's breathability, enabling retained moisture to escape.
• Surface remains non-slippery.
• Enhances the longevity of slatestone.

Unsealed slatestone surfaces in Point Arkwright are extremely porous and prone to permanent staining from daily spills. Sealing is crucial to safeguard your slatestone against undesired staining and deterioration.

If you have a slatestone tiled floor in Point Arkwright, you'll notice its rapid absorption of liquids, making it susceptible to stains carried by liquids.

Red wine, oil, and grease, in particular, can cause damage to slatestone in Point Arkwright that may require heavy resurfacing machinery for removal. While sealing slatestone won't entirely prevent liquids from being absorbed into it, it will provide you with time to wipe spills away before permanent damage occurs.

Cleaning and maintaining slatestone flooring in Point Arkwright can also become more challenging when left unsealed, as surface contaminants will rapidly absorb into the porous slatestone structure, making them difficult to remove.

The finest penetrating sealer available today is made in Australia in Point Arkwright. It produces non-solvent sealers that are easy to apply using a brush, roller, or sprayer and dry within a few hours.

deep penetrating slatestone sealers are offered in a dry, invisible finish or a slightly wet, color-enhancing effect, with a lifetime of 10 to up to 15 years.

Slatestone in Point Arkwright will vary in hardness and is inherently porous – if you apply a small amount of water to an unsealed slatestone surface, it will be absorbed in seconds. The porosity of slatestone is also influenced by its finish – for instance, a highly polished slatestone is less porous compared to slatestone with a honed (matte) finish.

The Fluoro-chemical technology integrated into Australian GOLD represents the most advanced technology available in Point Arkwright, offering ultimate long-term protection against water and oil-based stains. The micro-molecular formula chemically reacts with the slatestone surface to establish a bond stronger than any other conventional sealer.

makes caring for your stone much easier!

Provides durable protection against stains, superior oil and water repellency, maintains the natural surface appearance, is non-film forming, breathable, and easy to clean and maintain, preserving the beauty of your slatestone in Point Arkwright.

Choose a reputable company with specialized equipment and expertise in slatestone care to handle the sealing process.

Maintain cleanliness by promptly wiping up spills and periodically cleaning the sealed slatestone surface.

Professional cleaning services are essential to remove surface dirt and deeply embedded debris from the slatestone pores.

Contact a professional stone floor maintenance company in Point Arkwright with the necessary equipment and knowledge to achieve your desired results.

Tile Cleaners Australia and StoneMaster are members of the network of independent Accredited Applicators who have been fully trained in the proper application of slatestone care products. They offer a full service by thoroughly cleaning the slatestone area to be treated, product application, and providing after-sales care.

• Tile Cleaners Australia is Australia's leading tile care provider offering services such as slatestone cleaning, restoration, tile sealing, stripping & sealing, regrouting, grout color sealing, and minor tile repairs. Their friendly customer service team is very helpful and can assist with any slatestone cleaning or restoration inquiries.
• StoneMaster takes a diagnostic approach to each unique slatestone situation, conducting a full analysis and selecting the best-required method of restoration and follow-up maintenance procedures to ensure outstanding results.

Ensuring your slatestone in Point Arkwright is thoroughly cleaned before sealing is important as you may seal in old stains or dust and debris embedded in the stone, resulting in the sealer needing to be stripped and resealed.