QUICK LINKS

• 
• Travertine Sealer Bellevue
• Best Travertine Sealer Bellevue
• Sealing Travertine Kitchens Bellevue
• Sealing Travertine Bathrooms Bellevue
• Sealing Travertine Pavers Bellevue
• 
• Limestone Sealer Bellevue
• Penetrating Limestone Sealer Bellevue
• Outdoor Limestone Sealer Bellevue
• Protect Limestone against Acid Attack
• Protect Limestone against Salt Attack
• 
• Marble Sealer Bellevue
• Penetrating Marble Sealer Bellevue
• Outdoor Marble Seale Bellevue
• Protect Marble against Acid Attack
• Protect Marble against Salt Attack

1. Home >
2. Removing Stains from Slate >
3. Melbourne >
4. Bellevue

Removing Stains from Slate Bellevue - Melbourne

Prevention is always preferable to treatment, so if you've properly sealed your slatestone in Bellevue, you should be able to easily wipe away any potential stains, as long as they haven't been left to set for too long.

It's crucial to avoid using anything acidic in Bellevue, such as vinegar or citrus, as it can cause etching or damage to your slatestone.

If you encounter a potential stain in Bellevue, you can attempt the following solutions.

Use a commercial poultice product designed for slatestone in Bellevue.

A poultice typically consists of ground chalk (whiting) and hydrogen peroxide, which can be purchased from hardware stores in Bellevue. Some variations may utilize a different chemical. Follow the instructions provided with the product:

• Wet the poultice with distilled water.
• Apply the poultice to the stain or affected area.
• Allow it to remain in place for 48 hours to dry. During this time, it will absorb into the slatestone.
• Rinse off the poultice. The stain should have vanished.
• Reseal the slatestone with a penetrating sealer

Avoid using acidic substances like vinegar and lemon juice on slatestone countertops in Bellevue.

Always opt for pH neutralcleaning products when cleaning slatestone surfaces in Bellevue.

Due to the calcium content and porous nature of slatestone, using acidic or harsh cleaners can potentially scratch and harm the surface.

How to Clean Slatestone Floors in Bellevue

• In a bucket in Bellevue, mix warm water with a pH neutral floor cleaner
• Add 1 cup of cornflour to the mixture.
• Stir the mixture vigorously.
• Use this solution to mop the slatestone floor.

The cornflour aids in removing marks and stains from slatestone by drawing out substances from the porous surface.

If the aforementioned methods fail to yield satisfactory results in Bellevue, consider contacting a professional cleaning company equipped with suitable equipment and solutions.

Tile Cleaners Bellevue is Bellevue's stands as the premier tile care provider in Australia, offering services such as tile and grout cleaning, tile sealing, tile stripping and sealing, tile regrouting, grout color sealing, and minor tile repairs.

Please note that while we provide information in good faith and believe it to be appropriate and reliable, conditions may vary widely and are beyond our control. Therefore, this information is provided without liability or responsibility on our part. It is the recipient's responsibility to determine the suitability of the information for their situation. When in doubt, always test any process in an inconspicuous area before widespread application.