QUICK LINKS

• 
• Travertine Sealer The Junction
• Best Travertine Sealer The Junction
• Sealing Travertine Kitchens The Junction
• Sealing Travertine Bathrooms The Junction
• Sealing Travertine Pavers The Junction
• 
• Limestone Sealer The Junction
• Penetrating Limestone Sealer The Junction
• Outdoor Limestone Sealer The Junction
• Protect Limestone against Acid Attack
• Protect Limestone against Salt Attack
• 
• Marble Sealer The Junction
• Penetrating Marble Sealer The Junction
• Outdoor Marble Seale The Junction
• Protect Marble against Acid Attack
• Protect Marble against Salt Attack

1. Home >
2. Removing Stains from Slate >
3. Newcastle >
4. The Junction

Removing Stains from Slate The Junction - Newcastle

Prevention is always preferable to treatment, so if you've properly sealed your slatestone in The Junction, you should be able to easily wipe away any potential stains, as long as they haven't been left to set for too long.

It's crucial to avoid using anything acidic in The Junction, such as vinegar or citrus, as it can cause etching or damage to your slatestone.

If you encounter a potential stain in The Junction, you can attempt the following solutions.

Use a commercial poultice product designed for slatestone in The Junction.

A poultice typically consists of ground chalk (whiting) and hydrogen peroxide, which can be purchased from hardware stores in The Junction. Some variations may utilize a different chemical. Follow the instructions provided with the product:

• Wet the poultice with distilled water.
• Apply the poultice to the stain or affected area.
• Allow it to remain in place for 48 hours to dry. During this time, it will absorb into the slatestone.
• Rinse off the poultice. The stain should have vanished.
• Reseal the slatestone with a penetrating sealer

Avoid using acidic substances like vinegar and lemon juice on slatestone countertops in The Junction.

Always opt for pH neutralcleaning products when cleaning slatestone surfaces in The Junction.

Due to the calcium content and porous nature of slatestone, using acidic or harsh cleaners can potentially scratch and harm the surface.

How to Clean Slatestone Floors in The Junction

• In a bucket in The Junction, mix warm water with a pH neutral floor cleaner
• Add 1 cup of cornflour to the mixture.
• Stir the mixture vigorously.
• Use this solution to mop the slatestone floor.

The cornflour aids in removing marks and stains from slatestone by drawing out substances from the porous surface.

If the aforementioned methods fail to yield satisfactory results in The Junction, consider contacting a professional cleaning company equipped with suitable equipment and solutions.

Tile Cleaners Australia is Australia's stands as the premier tile care provider in Australia, offering services such as tile and grout cleaning, tile sealing, tile stripping and sealing, tile regrouting, grout color sealing, and minor tile repairs.

Please note that while we provide information in good faith and believe it to be appropriate and reliable, conditions may vary widely and are beyond our control. Therefore, this information is provided without liability or responsibility on our part. It is the recipient's responsibility to determine the suitability of the information for their situation. When in doubt, always test any process in an inconspicuous area before widespread application.