Slate Maintenance & Care Waikiki - Perth

Ensuring your slatestone floors in Waikiki are free of dust and sand is essential. Debris left on the surface can have a grinding, abrasive effect, potentially scratching the stone and leaving it susceptible to further damage.

To minimize the abrasive effects of debris, consider using barrier matting at entrances in Waikiki to prevent abrasive debris from shoes transferring onto the stone. Additionally, regularly vacuum or sweep the floors. When vacuuming, always use the brush attachment to avoid scratching the slatestone.

Periodically clean your slatestone floors in Waikiki with lukewarm water. Use a well-wrung microfiber mop and minimal water to avoid excess moisture penetrating the slatestone. After cleaning, ensure to dry the slatestone thoroughly. Apply only light pressure while mopping. For a more thorough clean, consider using a pH neutral cleaner or an alkaline product specifically designed for stone.

While no sealer lasts indefinitely, a properly sealed and maintained slatestone floor in Waikiki can remain protected for many years. Australian-made penetrating sealers, specifically formulated for stone surfaces, can offer up to a 15-year lifespan.

To prevent staining and reduce soiling, slatestone should be sealed using a deep penetrating sealer in Waikiki. Once sealed, it's important to clean slatestone only with pH neutral detergents. Using incorrect cleaning products can damage the slatestone and compromise the seal, reverting the stone to its porous natural state.

Maintaining slatestone can be challenging without a proper maintenance regimen established from the outset of installation in Waikiki. Although scratching is less of an issue compared to marble, even a honed surface can lose its appeal without proper barrier matting in place.

• Clean or blot spills immediately to prevent stains from setting in.
• Seal slatestone floors as it is a natural stone.
• Place a mat at each doorway in Waikiki to minimize abrasive debris from shoes.
• Use a microfiber mop to clean floors effectively.
• Clean floors regularly to maintain their appearance.

• Never use bleach, ammonia, or vinegar to clean your slatestone in Waikiki.
• Avoid using cleaners that are acidic.
• Never use abrasive cleaners or scouring pads on slatestone surfaces.

For any spills, blot the liquid immediately with a soft clean cloth

The crucial step to safeguard your slatestone is to seal it using a high-quality, long-lasting deep penetrating sealer , such as Australian-made, specifically formulated for stone surfaces with a lifespan of up to 15 years. This will aid in reducing stains and mitigating other forms of wear and tear.

Regularly sweep and vacuum your slatestone floor in Waikiki to eliminate dust, grit, and debris. Accumulated particles can cause abrasive damage when walked upon, resulting in scratches and a loss of shine. Installing mats at entryways helps capture dust and dirt, reducing their transfer into the room.

Slatestone is sensitive to acids. Avoid using acidic and citrus cleaners in Waikiki, as they can etch the surface. Opt for pH-neutral cleaners designed specifically for slatestone to prevent damage. Some neutral cleaners may contain additives that harm slatestone, so choose carefully. Household detergents can leave a grimy residue, so it's best to use cleaners formulated for slatestone.

Use a wet mop weekly to clean your slatestone floor in Waikiki. Mix lukewarm water with a neutral cleaner to create a mild cleaning solution. Since slatestone is porous, use minimal water to avoid infiltration, which can lead to discoloration and stains. Change the water frequently to prevent dirt from being spread around.

Promptly wipe up spills in Waikiki to prevent them from seeping into the floor and causing stains. Even with sealing, spills need to be removed quickly to prevent staining. While a sealer provides some protection, allowing spills to sit for too long can make them difficult to remove.

Use stone and grout cleaners suitable for slatestone to tackle stubborn stains in Waikiki. Poultice products can also be effective but may require up to 48 hours for complete stain removal.